top of page

WEEE Recycling: How Metals Are Recovered from Electronic Waste

6 hours ago
4 min read
WEEE recycling

Short answer: WEEE recycling is the recovery of valuable materials from Waste Electrical and Electronic Equipment, such as computers, small appliances, printers and circuit boards. After hazardous parts are removed, the waste is shredded, milled to free the metals, and separated into ferrous metals, a copper-rich metal fraction, aluminum and a plastic fraction. MİZAR’s MMP (Multi Metal Plant) lines carry out this mechanical process in one integrated, PLC-controlled line.

Key Takeaways

  • WEEE is one of the fastest-growing waste streams in the world.

  • It contains copper, aluminum, steel and precious metals, along with plastics and other materials.

  • Hazardous components (batteries, refrigerants, CRT glass, etc.) must be removed before mechanical processing.

  • Typical MMP line: double shaft shredder → magnet → hammer mill → turbo mill → densimetric separator → dust collector.

  • Outputs: ferrous metals, a copper-rich metal fraction, aluminum, a plastic fraction and collected fine dust.

What Is WEEE?

WEEE stands for Waste Electrical and Electronic Equipment. It covers end-of-life devices that run on electricity or batteries, including:

  • Computers, laptops, servers and IT equipment

  • Mobile phones and telecom equipment

  • TVs and monitors

  • Small household appliances: vacuum cleaners, kitchen devices, irons

  • Printers and office equipment

  • Electric toys and tools

  • Large household appliances such as washing machines (usually dismantled first)

  • Medical and laboratory equipment

WEEE is also commonly called e-waste.

Why Is WEEE Recycling Important?

The volume of e-waste is growing much faster than recycling capacity. According to the UN’s Global E-waste Monitor 2024, a record 62 million tonnes (Mt) of e-waste was produced in 2022, up 82% from 2010, and it is on track to rise another 32%, to 82 million tonnes, in 2030.

Only a small share is properly recycled. Only 22.3 per cent (13.8 billion kg) was documented as formally collected and recycled in an environmentally sound manner.

E-waste is also a rich resource. The same report estimated 31 million tonnes: estimated weight of metals embedded in e-waste in 2022, along with 17 million tonnes of plastics and 14 million tonnes of other materials (minerals, glass, composite materials, etc.)

What Materials Are in WEEE?

Material

Where It’s Found

Copper

Wiring, PCBs, motors, coils

Aluminum

Housings, heat sinks, frames

Iron and steel

Frames, casings, screws, motors

Precious metals (gold, silver, palladium)

PCBs, connectors, chips

Plastics

Housings and internal parts

Glass and other materials

Screens and components

How Does WEEE Recycling Work? Step by Step

1. Collection, sorting and depollution

WEEE is collected and sorted by type. Hazardous components such as batteries, refrigerants, capacitors, CRT glass and mercury-containing parts are removed according to local regulations. Large appliances are usually dismantled before shredding.

2. Pre-shredding: double shaft shredder

A double shaft shredder breaks devices into smaller pieces and opens up housings and components.

3. Ferrous removal: magnetic separator

A magnetic separator removes iron and steel parts, which are sold as ferrous scrap.

4. Liberation: hammer mill

A hammer mill breaks the material by impact and frees metals from plastics, fiberglass and other bonded materials.

5. Fine milling: turbo mill

A turbo mill reduces the material to fine, uniform particles, freeing small metal particles for more precise separation.

6. Separation: densimetric separator

A densimetric separator splits heavy metals from light plastics and other non-metals by density.

7. Dust collection

A dust collector captures fine dust throughout the process. This keeps the work area clean and safe, and the dust can contain recoverable metals.

Recovered Outputs from WEEE Recycling

  • Ferrous metals: iron and steel from the magnetic separator

  • Copper-rich metal fraction: a high-purity metal concentrate containing copper and, depending on the feed, precious metals, ready for sale or refining

  • Aluminum: recovered depending on the feed composition and line configuration

  • Plastic fraction: mixed plastic granules for further processing or sale

  • Fine dust: collected and suitable for further processing or refining

Purity and yield depend on the WEEE type and composition. MİZAR tests customer samples to show the expected output before purchase.

MİZAR’s WEEE Recycling Solution: MMP Series (Multi Metal Plant)

MİZAR Recycling Machinery manufactures the MMP Series in Konya, Türkiye, for WEEE, PCBs, radiators and other mixed metal-bearing waste.

MMP line configuration:

  • DSH double shaft shredder

  • OMS F ferrite magnetic separator

  • HMR hammer mill with Hardox® 500 hammers

  • TRM turbo mill

  • DES densimetric separator with DTF A dust collector

  • PLC control for the whole line

Model

Shredder

Hammer Mill

Turbo Mill

Densimetric Separator

Capacity

MMP S

2 × 15 kW

37 kW

15 kW

15 kW

up to 400 kg/h

MMP M

2 × 30 kW

55 kW

30 kW

20 kW

up to 800 kg/h

MMP L

2 × 45 kW

90 kW

45 kW

27 kW

up to 1,300 kg/h

Options: an eddy current separator for extra non-ferrous recovery, and feeding or screening equipment depending on the material.

Why Choose MİZAR for WEEE Recycling?

  • Integrated line: shredding, liberation, separation and dust collection in one PLC-controlled system

  • Durable design: Hardox® 500 hammers for abrasive e-waste and PCBs

  • Material testing with your own samples before you invest

  • Site-specific engineering, from on-site survey to commissioning and training

  • CE certified, with machines in use in more than 40 countries

  • Combined lines possible for WEEE, cables and radiators on one plant

Frequently Asked Questions

What does WEEE stand for?

Waste Electrical and Electronic Equipment, meaning end-of-life electrical and electronic devices, also called e-waste.

What metals can be recovered from WEEE?

Mainly iron, steel, copper and aluminum, plus precious metals such as gold, silver and palladium from circuit boards.

Do hazardous parts need to be removed before shredding?

Yes. Batteries, refrigerants, CRT glass, mercury-containing parts and other hazardous components must be removed according to local regulations before mechanical processing.

Can a WEEE recycling line extract gold?

The line produces a metal-rich concentrate that contains precious metals. Pure gold is extracted by specialized refineries.

What capacity does a WEEE recycling line have?

MİZAR MMP lines are available with capacities of up to 400, 800 and 1,300 kg/h.

Can the same line process PCBs and radiators?

Yes. MMP lines are designed for WEEE, PCBs, radiators and other mixed metal-bearing waste.

Conclusion

WEEE is one of the fastest-growing waste streams in the world, and one of the richest in recoverable metals. With the right mechanical process (shredding, impact milling, density separation and dust control), recyclers can turn e-waste into valuable ferrous, copper and aluminum fractions. MİZAR’s MMP Series is built for exactly that.

Planning a WEEE recycling plant? Contact MİZAR for a line configuration based on your material and capacity.

📞 +90 537 520 35 34

 
 
bottom of page