top of page

PCB Recycling: How Copper, Gold and Other Metals Are Recovered from Circuit Boards

9 hours ago
4 min read
PCB recycling

Short answer: PCB recycling recovers valuable metals from printed circuit boards: mainly copper, plus gold, silver and palladium. A PCB is a tightly bonded mix of metal, fiberglass and resin. Recycling it is a mechanical process: the boards are shredded, milled to free the metal from the fiberglass, and separated by density into a metal concentrate and a non-metal fraction. The metal concentrate is then sold to refineries, which extract the precious metals.

Key Takeaways

  • PCBs contain copper, gold, silver, palladium, tin and other metals bonded to fiberglass and epoxy resin.

  • By weight, copper is the largest metal in most PCBs. Precious metals carry high value even in small amounts.

  • Typical process: double shaft shredder → magnet → hammer mill → turbo mill → densimetric separator → dust collector.

  • Magnets remove only steel. Copper and precious metals are separated by density.

  • Board grade (high vs. low, populated vs. bare) strongly affects metal value.

What Is in a Printed Circuit Board?

A printed circuit board is a layered structure:

  • Substrate: fiberglass-reinforced epoxy resin (FR-4), the non-metal base of the board

  • Copper: conductive tracks and layers inside and on the surface of the board

  • Solder: tin-based alloys that join components to the board

  • Components: chips, connectors, capacitors and other parts containing gold, silver, palladium and other metals

In a typical PCB, metals make up roughly a third of the weight, and copper is the largest share. The rest is mostly fiberglass and resin.

Types of PCB Scrap

PCB Type

Description

Typical Value

High-grade

IT, telecom and server boards, mobile phone boards

Higher (more gold and palladium)

Medium-grade

Desktop and laptop boards, network equipment

Medium

Low-grade

TV, appliance and power supply boards

Lower

Bare (depopulated) boards

Boards with components removed

Mainly copper value

Sorting PCBs by grade before processing helps the recycler get the best price for each batch.

Why Is PCB Recycling Challenging?

  • Bonded structure: Copper is laminated inside fiberglass and resin layers, so the board has to be milled to free it.

  • Abrasive material: Fiberglass wears blades and hammers quickly.

  • Fine particles: Milling produces fine dust that can carry metal value.

  • Mixed composition: Every board type has a different metal content.

How Does PCB Recycling Work? Step by Step

1. Pre-shredding: double shaft shredder

A double shaft shredder cuts boards into smaller pieces and opens up the layered structure.

2. Ferrous removal: magnetic separator

A magnetic separator removes steel parts such as screws, brackets and shields.

3. Liberation: hammer mill

A hammer mill breaks the shredded pieces by impact and frees copper and other metals from the fiberglass and resin. Wear-resistant hammers are essential, because fiberglass is highly abrasive.

4. Fine milling: turbo mill

A turbo mill reduces the material to fine, uniform particles, freeing even small metal particles.

5. Separation: densimetric separator

A densimetric separator splits the heavy metal fraction (copper with precious metals) from the light non-metal fraction (fiberglass and resin powder).

6. Dust collection

A dust collector captures fine dust throughout the process. This keeps the work area clean and safe and keeps metal-bearing dust from being lost.

7. Refining (by specialized refineries)

The metal concentrate is sold to refineries, which extract pure copper, gold, silver and palladium.

Common Mistake: Magnets Don’t Separate Copper or Gold

Copper, gold, silver and palladium are not magnetic. A magnetic separator removes only iron and steel. The valuable metals are separated from fiberglass and resin by density.

Safety and Environment in PCB Recycling

PCBs can contain substances such as lead-based solder and brominated flame retardants in the resin. A mechanical recycling line addresses this in three ways:

  • Closed processing and dust collection keep fine dust under control and protect operators.

  • No chemicals are used in the mechanical stage.

  • Controlled output fractions go to licensed refineries and waste handlers.

Recyclers should follow local regulations for e-waste handling and for the storage and transport of output fractions.

MİZAR Solutions for PCB Recycling

MİZAR Recycling Machinery manufactures PCB and e-waste recycling lines in Konya, Türkiye.

MMP Series (Multi Metal Plant) for PCBs, e-waste, radiators and other mixed metal-bearing waste:

  • DSH double shaft shredder

  • OMS F ferrite magnetic separator

  • HMR hammer mill with Hardox® 500 hammers

  • TRM turbo mill

  • DES densimetric separator with DTF A dust collector

  • PLC-controlled, available as MMP S / M / L with capacities of up to 400 / 800 / 1,300 kg/h

MİZAR also designs combined lines that process PCBs together with cables and radiators, sharing a common separation section.

Frequently Asked Questions

What metals can be recovered from PCBs?

Mainly copper, plus gold, silver, palladium and tin. Copper is the largest metal fraction by weight.

Can a PCB recycling machine extract gold?

The machine produces a metal concentrate that contains gold and other precious metals. Pure gold is extracted by specialized refineries.

What is the difference between high-grade and low-grade PCBs?

High-grade boards, such as IT, telecom and phone boards, contain more gold and palladium. Low-grade boards, such as TV and power supply boards, contain less.

Why is a hammer mill used for PCB recycling?

PCBs are brittle and layered. A hammer mill breaks them by impact and frees the metals from the fiberglass more effectively than cutting.

Do magnetic separators separate copper from PCBs?

No. Magnets only remove steel. Copper and precious metals are separated by density.

What happens to the non-metal fraction?

The fiberglass and resin powder can be used as filler in some construction and composite applications, or handled according to local waste regulations.

Conclusion

PCBs are one of the most valuable and most complex parts of the e-waste stream. Recovering their copper and precious metals takes the right mechanical process: shredding, impact milling, density separation and effective dust control. MİZAR’s MMP lines are built for exactly that, turning circuit board scrap into a clean metal concentrate ready for refining.

Processing PCBs or e-waste? Contact MİZAR for a line configuration based on your board type and volume.

📞 +90 537 520 35 34

 
 
bottom of page