Cable Recycling: A Complete Guide to Cable Types, Processes and Machines

Short answer: Cable recycling recovers copper and aluminum from scrap cable by separating the metal conductors from their plastic insulation. There are two main methods. Stripping recovers the bare conductor from thick, straight cables. Granulation shreds and cuts cable into small particles, then separates copper and plastic by density. Which method and machine to choose depends on the cable type, how mixed the scrap is, and your volume.
Key Takeaways
Cable scrap varies widely: from thick single-core power cable to fine automotive harnesses and greasy telecom cable.
Stripping suits thick, straight cables. Granulation suits thin, mixed and short cables.
Sorted and thick cables are the easiest to granulate. Mixed, fine, greasy and textile-filled cables need a more advanced line.
Copper purity of up to 99.9% is achievable with the right granulation and separation setup.
MİZAR offers a solution for each case: CBR A (stripping), CMT A (compact), ERP and ERP Line (sorted and thick cables) and PRP (mixed and difficult cables).
Cable Types in Recycling
Not all cable scrap is the same. Each cable type has a different structure and copper content, which affects how it’s best recycled.
Cable Type | Structure | Recycling Notes |
Single-core power cable | One solid or stranded conductor, PVC/rubber insulation | High copper content. Strip if thick, granulate if thin. |
Armored multi-core cable | Several cores + steel wire or tape armor | Steel must be removed by magnet. Needs pre-shredding. |
Twin and earth (T&E) | Flat PVC sheath, two cores + bare earth | Ideal for granulation |
Flex cable | Many fine copper strands | Needs fine-copper recovery |
Coaxial cable | Copper center + braided shield | Fine braid needs good separation |
Data / LAN cable | Twisted thin copper pairs | Low copper share, fine wires |
Automotive wiring harness | Thin, colorful wires with connectors | Mixed and fine, needs an advanced line |
Aluminum cable | Aluminum conductors | Process separately from copper for purity |
Telecom multi-pair cable | Many thin pairs, often gel-filled | Greasy and fine, needs an advanced line |
Other difficult types: greasy cables, textile- or paper-insulated cables, and cables with fillers or tapes. All of these need a line that can handle contamination and fine particles.
How Does Cable Recycling Work?
Method 1: Cable Stripping
A cable stripper slits the insulation along the cable and pulls out the bare copper or aluminum conductor.
Best for: thick, long, straight cables
Output: bare conductor + insulation
Advantage: low investment, no granulation needed
Method 2: Cable Granulation
The cable is cut into small particles, which frees the metal from the insulation. A separator then splits copper and plastic.
Typical granulation process:
Pre-shredding: a single shaft shredder cuts long and mixed cable into uniform pieces.
Magnetic separation: a magnet removes steel parts, for example from armored cable.
Granulation: a fine granulator cuts the material into 3–5 mm granules, which frees the copper from the insulation.
Air separation (zigzag): splits thick copper, fine copper and plastic. Used for mixed and fine cable.
Re-milling (turbo mill): reprocesses the material to recover more fine copper.
Density separation: a densimetric separator splits copper and plastic by density, for a high-purity copper output.
Dust collection: extracts dust throughout the process.
Output: copper (or aluminum) granules + plastic granules.
Strip or Granulate? Quick Guide
Your Cable | Recommended Method |
Thick, straight cable (power, single-core) | Stripping (or granulation) |
Thin, short or tangled cable | Granulation |
Sorted cable of one type | Granulation (basic line) |
Mixed, fine, greasy or textile cable | Granulation (advanced line) |
Which MİZAR Cable Recycling Machine Is Right for You?
Machine | Best For | Capacity | Key Features |
CBR A Cable Stripper | Stripping thick cables | 25 m/min, cables 1–120 mm | Multi-inlet, no adjustment between sizes |
CMT A Compact | Low-volume operations | Up to 150 kg/h | Compact, copper purity up to 99.9% |
ERP Series | Thick and sorted cables | Up to 400 / 800 / 1,300 / 2,000 kg/h | Fine granulator + densimetric separator, simple and cost-effective |
ERP Line | Thick and sorted cables in higher volume | Line configuration | ERP with pre-shredder and PLC |
PRP Series | Mixed and difficult cables: fine, greasy, textile-filled | Up to 400 / 800 / 1,300 / 2,000 kg/h | Shredder + zigzag + turbo mill + densimetric separator, PLC |
CBR A: Cable Stripper
For recyclers who handle thick, straight cables and want the bare copper conductor. Its multi-inlet design handles cables from 1 to 120 mm without adjustment, at 25 m/min.
CMT A: Compact Cable Recycling Machine
For small and low-capacity operations, such as small scrap yards, electrical contractors and workshops. Granulator → turbo mill → densimetric separator + dust collector in a compact footprint. Processes up to 150 kg/h with copper purity of up to 99.9%.
ERP Series: Eco Recycling Plant
For thick cables and sorted cable streams. ERP combines MİZAR’s FGR fine granulator with a densimetric separator. A simple, cost-effective solution when your cable is of a consistent type. Available in four sizes, from 400 to 2,000 kg/h.
ERP Line
For sorted and thick cables at higher volumes. It adds a pre-shredder and PLC control to the ERP configuration, so long and bulky cables can be fed continuously.
PRP Series: Pro Recycling Plant
For mixed and difficult cables: fine wires, automotive harnesses, telecom cable, greasy cables and textile-filled cables. The PRP line includes a single shaft shredder, magnet, fine granulator, zigzag separator, turbo mill and densimetric separator, all under PLC control. The zigzag separator and turbo mill recover the fine copper that simpler lines lose. Available in four sizes, from 400 to 2,000 kg/h.
Why Recycle Cable In-House?
Higher value: clean copper granules sell for much more than insulated cable scrap.
Control: you know exactly what copper yield and purity you get.
Plastic recovery: separated plastic can also be sold.
Sustainability: recycled copper saves natural resources and energy compared with primary production.
Frequently Asked Questions
What is the best way to recycle copper cable?
It depends on the cable. Thick, straight cables can be stripped. Thin, mixed and short cables are best granulated and separated by density.
What copper purity can cable recycling achieve?
With a properly configured granulation and density separation line, copper purity of up to 99.9% is achievable.
Which machine is best for mixed cable scrap?
A line with a zigzag separator and turbo mill, such as the MİZAR PRP Series, recovers more fine copper from mixed and difficult cable.
Can greasy or textile-filled cables be recycled?
Yes, with an advanced line such as the PRP Series, which handles contamination and fine particles better than a basic line.
What is the best cable recycling machine for a small business?
A compact system such as the MİZAR CMT A, which processes up to 150 kg/h in a small footprint.
Should copper and aluminum cables be processed together?
Sorting them first gives the highest purity and value for both metals.
Conclusion
Cable recycling is one of the most profitable activities in metal recycling, but the right result depends on the right match: cable type, scrap mix and volume. From the CBR A stripper and the compact CMT A to the ERP for sorted cable and the PRP for difficult cable, MİZAR offers a solution for every cable recycling operation.
Not sure which machine fits your cable? Send us your cable types and volume, or a sample for testing, and we’ll recommend the right solution.
📞 +90 537 520 35 34


