top of page

Twin and Earth Cable Recycling: Copper Content and the Best Process

14 hours ago
4 min read
twin and earth cable recycling

Short answer: Twin and Earth (T&E) is the flat, grey PVC-sheathed cable used for wiring most homes and buildings in the UK. It contains roughly 40–55% copper by weight, depending on its size. Its flat shape and three conductors make hand stripping slow, so the most efficient way to recycle T&E is a cable granulation line. The line separates the cable into clean copper granules and PVC granules.

Key Takeaways

  • T&E is the standard UK wiring cable for buildings, made to BS 6004 (type 6242Y / 6242B).

  • It contains two insulated conductors (live and neutral) and one bare earth conductor inside a flat PVC sheath.

  • Copper content is about 40–55% by weight. Larger sizes contain more copper.

  • Manual stripping is slow and impractical. Granulation is the efficient method.

  • Both the copper and the PVC can be recovered and sold.

What Is Twin and Earth Cable?

Twin and Earth is a flat electrical cable used for fixed wiring of lighting and socket circuits in residential and commercial buildings. It’s the standard building cable in the UK and is made to BS 6004 (common types: 6242Y and the low-smoke 6242B). The closest North American equivalent is NM-B cable, often called “Romex”.

How it’s built:

  • Two insulated conductors: live (brown) and neutral (blue), each in its own PVC insulation

  • One bare earth conductor (CPC): uninsulated copper running between the two cores

  • Outer sheath: a flat grey or white PVC sheath

Smaller sizes (1.0–2.5 mm²) usually have solid copper conductors. Larger sizes (4 mm² and up) often have stranded conductors.

Where T&E cable scrap comes from:

  • Electrical contractors (rewiring, offcuts and leftover drums)

  • House renovations and demolitions

  • Commercial fit-outs and building refurbishments

  • Construction and demolition waste streams

How Much Copper Is in Twin and Earth Cable?

T&E typically contains about 40–55% copper by weight. The rest is mainly PVC insulation and sheathing. The copper share rises with conductor size:

T&E Size

Approx. Copper Content

1.0–1.5 mm² (lighting)

Lower end (~40%)

2.5 mm² (sockets)

Around 50%

6–10 mm² (cookers, showers)

Higher end (~55%)

These are approximate values. Actual content varies by manufacturer and cable type. A sample granulation test is the most reliable way to measure the yield of your material.


Why Granulate Instead of Strip T&E Cable?

Why stripping doesn’t work well:

  • The flat profile doesn’t fit round-cable strippers well.

  • There are three separate conductors, and two of them have their own insulation layer.

  • Scrap usually arrives as short offcuts and tangled lengths.

  • Labor cost per kilogram of copper is high.

Why granulation does:

  • T&E can be fed continuously in any length or tangle.

  • Solid copper breaks into compact, heavy particles that separate cleanly from PVC.

  • The bare earth conductor needs no stripping at all.

  • The output is uniform copper granules and PVC granules, both ready to sell.

What Happens to the PVC from T&E Cable?

After separation, the PVC fraction can be sold to plastic recyclers and used again in products such as flooring, matting, traffic cones and cable protection. In a well-configured line, the plastic fraction contains very little copper. Any copper left in it can be recovered with a dedicated copper recovery system.


MİZAR Solutions for Twin and Earth Cable Recycling

MİZAR Recycling Machinery designs and manufactures cable granulation systems in Konya, Türkiye, for recyclers in the UK and worldwide:

  • CMT Compact Series: a compact granulator → turbo mill → densimetric separator system, with copper purity of up to 99.9%. A good fit for electrical contractors and smaller scrap yards processing their own T&E offcuts.

  • ERP-Line: a pre-shredder + granulator + separation line for higher volumes of building wire.

  • PRP: a high-performance line for mixed cable streams, including fine and flexible cables.

  • CRP (Copper Recovery Plant): recovers the remaining copper from plastic fractions.

All systems are CE certified and can be configured with European, US, Japanese or Turkish component brands to suit your budget.

Frequently Asked Questions

How much copper is in twin and earth cable?About 40–55% by weight, depending on the cable size. Larger sizes such as 6 mm² and 10 mm² have a higher copper share than 1.0 mm² lighting cable.

Is it worth stripping twin and earth by hand?Usually not. The flat shape and three conductors make hand stripping slow. Granulation processes T&E much faster and with less labor.

What is the difference between 6242Y and 6242B cable?Both are twin and earth cables. 6242Y has a standard PVC sheath, while 6242B is a low-smoke, zero-halogen (LSZH) version. Both can be granulated.

Can the PVC from T&E cable be recycled?Yes. Separated PVC granules can be sold to plastic recyclers and reused in products such as flooring and matting.

What machine do I need to recycle twin and earth cable?A cable granulation system with copper/plastic separation. For smaller volumes, the MİZAR CMT Compact Series is a practical starting point. For higher volumes, a full granulation line such as the EPR M-Line is recommended.


Conclusion

Twin and Earth is one of the most common and most profitable cable scrap types in the UK. With 40–55% copper and a simple PVC construction, it’s ideal for granulation. With the right system, recyclers and electrical contractors can turn T&E offcuts and demolition cable into a steady source of high-value copper and saleable PVC.

Processing T&E cable? Contact MİZAR for a granulation solution based on your volume.

📞 +90 537 520 3534

 
 
bottom of page