top of page

Single-Core Cable Recycling: Why It’s the Most Profitable Cable Scrap

14 hours ago
4 min read
single core cable recycling

Short answer: A single-core cable has one copper conductor inside a layer of PVC or rubber insulation. That makes it one of the most profitable types of cable scrap. The copper content is high, the structure is simple, and copper separates cleanly from the insulation. Thin single-core cables (building wire) are best processed with a cable granulator. Thick single-core power cables can be stripped efficiently with a cable stripping machine.


Key Takeaways

  • A single-core cable has one conductor, which can be solid or stranded.

  • Its simple structure and high copper content make it ideal recycling feedstock.

  • Thin building wire → granulation. Thick power cable → stripping or granulation.

  • Solid copper conductors granulate into clean particles, with very little fine-copper loss.

  • Sorting copper from aluminum single-core cable before processing protects copper purity.


What Is a Single-Core Cable?

A single-core cable is an electrical cable with one conductor inside a layer of insulation, usually PVC or rubber. Some types also have an outer sheath.

The conductor itself can come in different forms:

  • Solid (Class 1): one solid copper wire, e.g. H07V-U

  • Stranded (Class 2): several thicker copper wires twisted together, e.g. H07V-R

  • Flexible (Class 5): many fine strands, e.g. H07V-K

In North America, typical single-core building wires include THHN/THWN.

Where single-core cables are used:

  • Electrical wiring in residential, commercial and industrial buildings

  • Switchboards and distribution panels

  • Power transmission (large-section single-core power cables)

  • Electronic devices and automotive wiring

Because they’re used so widely, single-core cables arrive at recycling yards in large, steady volumes from demolition, renovation and electrical installation waste.


Why Are Single-Core Cables Valuable for Recycling?

  1. High copper content: There are no multiple insulated cores, fillers or extra layers, so a larger share of the cable’s weight is copper.

  2. Simple structure: One conductor and one insulation layer separate easily.

  3. Clean separation: Solid and thick stranded copper break into compact, heavy particles that separate cleanly from plastic.

  4. Low fine-copper loss: Unlike flexible cables with very fine strands, single-core cables produce little light copper “fluff” that could escape into the plastic fraction.

The result is a high copper yield, high purity and a strong return per ton processed.


Single-Core vs. Multi-Core vs. Flex Cable

Criteria

Single-Core

Multi-Core

Flex Cable

Structure

1 conductor

Several insulated cores + sheath

Many fine strands

Copper content

High

Medium

Medium

Manual stripping

Practical for thick sections

Slow (several layers)

Almost impossible

Granulation

Excellent

Good

Good, needs fine-copper recovery

Fine copper loss

Very low

Low–medium

Higher without proper separation

Granulate or Strip? Choosing the Right Method

Cable granulation is best for:

  • Thin building wire (e.g. 1.5–6 mm²)

  • Large volumes of mixed lengths and sizes

  • Operations that want continuous, low-labor processing

The cable is shredded, granulated and separated into copper granules and plastic granules.

Cable stripping is best for:

  • Thick single-core power cables

  • Long, straight cable lengths

  • Smaller volumes where a lower investment matters

The stripper slits the insulation and pulls out the bare copper conductor as a whole.

Many recyclers use both: a stripper for thick cables and a granulation line for everything else.


MİZAR Solutions for Single-Core Cable Recycling

MİZAR Recycling Machinery designs and manufactures cable recycling equipment in Konya, Türkiye:

  • EPR-Line: a pre-shredder + granulator + separation line for efficient, high-volume single-core and mixed cable processing.

  • PRP-Series: a high-performance line with a zigzag separator and turbo mill, for operations that also process mixed and fine cables.

  • CMT Compact Series: a compact granulation system for smaller volumes, with copper purity of up to 99.9%.

  • CBR A Cable Stripper: a multi-inlet design for thick cables, with no adjustment needed between cable sizes.

All systems can be configured with European, US, Japanese or Turkish component brands to match your budget.


Frequently Asked Questions

Is a single-core cable always solid copper?No. Single-core means one conductor. That conductor can be solid, stranded or flexible. Solid and thick stranded types are the easiest to recycle.

Should I granulate or strip single-core cables?Granulate thin building wire and mixed volumes. Thick, straight power cables can be stripped efficiently. Many recyclers use both methods.

What copper purity can I get from single-core cable granulation?With a properly configured granulation and density separation system, copper purity of up to 99.9% is achievable.

Can aluminum single-core cables be processed in the same line?Yes, but sort them from copper cables first. Mixing aluminum and copper lowers copper purity and reduces the value of your output.

Why is single-core cable more profitable than multi-core cable?It has a higher copper share by weight, a simpler structure and cleaner separation, which leads to higher yield and less processing per ton of copper.

Conclusion

Single-core cables are among the most profitable materials in cable recycling: high copper content, a simple structure and clean separation. With the right method, granulation for building wire and stripping for thick power cable, recyclers can get the highest copper yield and purity from this material.

Want to know which MİZAR solution fits your cable mix? Contact us for a configuration based on your material and capacity.

📞 +90 537 520 3534

 
 
bottom of page