top of page

Precious Metal Recycling: How Gold, Silver, Palladium and Copper Are Recovered from E-Waste

10 hours ago
4 min read
precious metal recycling

Short answer: Precious metal recycling recovers valuable metals such as gold, silver, platinum and palladium, along with base metals like copper and aluminum, from waste such as printed circuit boards (PCBs), electronics and catalytic converters. It starts with mechanical processing: shredding, milling and separation turn the waste into a metal-rich concentrate. Refineries then extract the pure precious metals from that concentrate. The better the mechanical stage separates metals from plastics and other materials, the more value the recycler gets.

Key Takeaways

  • Precious metals (Au, Ag, Pt, Pd) and base metals (Cu, Al) are often found together in e-waste.

  • Precious metal recycling has two stages: mechanical processing at the recycler, then chemical or thermal refining at the refinery.

  • Typical line: shredder → magnet → hammer mill → turbo mill → densimetric separator → dust collector.

  • Magnets remove iron and steel. Copper and aluminum aren’t magnetic, so they’re separated by density or eddy current.

  • The cleaner the metal concentrate, the higher the price refiners pay.

Which Metals Are Recovered in Precious Metal Recycling?

Precious metals:

  • Gold (Au): connector pins, contacts and chip bonding in PCBs

  • Silver (Ag): solder, contacts and switches

  • Palladium (Pd): multilayer ceramic capacitors and catalytic converters

  • Platinum (Pt): catalytic converters and some electronic parts

Base metals:

  • Copper (Cu): PCB tracks, wiring, cables and motor windings. This is usually the largest metal fraction by weight.

  • Aluminum (Al): heat sinks, housings and radiators

Typical feedstock: printed circuit boards, small electronics, telecom and IT equipment, catalytic converters and mixed metal-bearing scrap.

Why Is Precious Metal Recycling Important?

  • Limited resources: Precious metals are rare, and mining them is costly and energy-intensive.

  • High concentration: Many electronic boards contain more gold per ton than natural gold ore.

  • Economic value: Recovering these metals turns waste into a valuable secondary raw material.

  • Circular economy: Metals can be recycled again and again without losing quality.

How Does Precious Metal Recycling Work? Step by Step

1. Pre-shredding: double shaft shredderA double shaft shredder breaks e-waste, PCBs and mixed scrap into smaller pieces. This makes the material easier to handle and opens up the components.

2. Ferrous removal: magnetic separatorA magnetic separator removes iron and steel parts such as screws, frames and brackets. This protects the following machines and cleans the material stream.

3. Liberation: hammer millA hammer mill breaks the material by impact and frees the metals from the plastic, fiberglass and resin in circuit boards.

4. Fine milling: turbo millA turbo mill reduces the material further. This frees fine metal particles and makes the material more uniform for separation.

5. Separation: densimetric separator (and eddy current, if needed)A densimetric separator splits metals from plastics and fiberglass by their difference in density. When needed, an eddy current separator recovers non-ferrous metals such as aluminum and copper from mixed streams.

6. Dust collectionA dust collector captures fine dust throughout the process. That dust can carry metal value, and capturing it also keeps the work area clean and safe.

7. Refining (by specialized refineries)The metal concentrate, rich in copper and precious metals, is sold to refineries. They extract pure gold, silver, palladium and platinum.

Magnetic vs. Eddy Current vs. Densimetric Separation

Separator

What It Separates

How It Works

Magnetic separator

Iron and steel (ferrous metals)

Magnetic attraction

Eddy current separator

Aluminum, copper and other non-ferrous metals from non-metals

Induced electric currents push non-ferrous metals away

Densimetric separator

Metals from plastics and fiberglass

Difference in density on an air-fluidized vibrating table

Common misconception: Magnetic separators don’t separate copper or aluminum. Neither metal is magnetic. They are recovered by density or eddy current separation.

Environmental Benefits of Mechanical Precious Metal Recycling

  • No chemicals in the mechanical stage: Shredding, milling and separation are purely mechanical processes.

  • Less mining: Recycled metals reduce the need for new extraction.

  • Less landfill: E-waste is kept out of landfill and uncontrolled dumping.

  • Controlled dust: Closed systems with dust collection protect workers and the environment.

MİZAR Solutions for Precious Metal Recycling

MİZAR Recycling Machinery manufactures complete mechanical processing lines for e-waste, PCB and mixed metal scrap in Konya, Türkiye.

MMP Series (Multi Metal Plant) for e-waste, PCBs, radiators and other mixed metal-bearing waste:

  • Double shaft shredder (DSH)

  • OMS F ferrite magnetic separator

  • Hammer mill (HMR) with Hardox® 500 hammers

  • Turbo mill (TRM)

  • Densimetric separator (DES) with DTF A dust collector

  • PLC-controlled, available as MMP S / M / L with capacities of up to 400 / 800 / 1,300 kg/h

  • Eddy current separator available as an option

For catalytic converters, MİZAR’s alligator shears and hammer mills support decanning and milling of ceramic cores.

Frequently Asked Questions

What is precious metal recycling?

It is the recovery of gold, silver, platinum, palladium and other valuable metals from waste such as e-waste, PCBs and catalytic converters, through mechanical processing followed by refining.

Can a recycling machine extract gold directly?

No. Machines produce a metal-rich concentrate. Pure gold and other precious metals are extracted by specialized refineries.

Do magnetic separators separate copper and aluminum?

No. Magnets only remove iron and steel. Copper and aluminum are separated by density (densimetric separator) or by eddy current.

Which waste contains the most precious metals?

High-grade PCBs from IT and telecom equipment, mobile phones and catalytic converters are among the richest sources.

Is copper a precious metal?

No. Copper is a base metal, but it’s often the most valuable fraction by weight in e-waste and cable recycling.

Conclusion

Precious metal recycling turns e-waste and scrap into a valuable resource while saving natural resources and energy. The key for recyclers is a mechanical line that frees metals and separates them cleanly, because a clean concentrate earns a higher price from refiners. MİZAR’s MMP lines are built for exactly that.

Want to recover precious metals from your e-waste or PCBs? Contact MİZAR for a line configuration based on your material.

📞 +90 537 520 35 34

 
 
bottom of page