MİZAR SSH Series Single Shaft Shredders for Cable, PCB and Radiator Recycling

Short answer: A single shaft shredder reduces bulky waste with one rotating shaft fitted with cutting blades. A hydraulic pusher presses the material against the rotor, and a screen under the rotor sets the output size. MİZAR SSH single shaft shredder for recycling cables, PCBs and radiators. It comes in four models from 15 kW to 90 kW, with a programmable hydraulic pusher, a variable-speed rotor and automatic reverse when a jam occurs.
Key Takeaways
One rotor with customized blades, plus a programmable hydraulic pusher for steady feeding.
A variable-speed rotor can be adjusted to suit different materials.
Automatic reverse clears jams without stopping production.
A screen under the rotor controls the output size.
Four models: SSH S, M, L and XL (15, 30, 45 and 90 kW).
Used as the first stage of MİZAR’s PRP cable recycling lines.
What Is a Single Shaft Shredder?
A single shaft shredder is a primary size-reduction machine. It has one rotor carrying cutting blades that work against fixed counter-blades. A hydraulic pusher (ram) moves the material steadily toward the rotor, so the machine doesn’t depend on gravity or manual feeding.
Under the rotor sits a screen. Material stays in the cutting chamber until it’s small enough to pass through. This is the main advantage of a single shaft shredder: it produces a controlled, uniform output size that suits the next stage, such as a granulator.
How Does the MİZAR SSH Work?
Feeding: Material is loaded into the hopper.
Pushing: The programmable hydraulic pusher presses the material steadily against the rotor.
Cutting: The variable-speed rotor cuts the material between the rotating blades and the fixed counter-blades.
Jam protection: If the rotor meets an overload or a jam, it automatically reverses, then resumes cutting.
Sizing: Shredded material leaves through the screen at the set size. In MİZAR PRP lines, 10 mm and 20 mm screens are typical.
MİZAR SSH Series: Technical Specifications
Model | Motor Power | Rotor Diameter | Rotor Length | Blades (Rotor + Counter) | Blade Size | Weight |
SSH S | 15 kW (20 HP) | 240 mm (9") | 430 mm (17") | 27 + 20 | 30 × 30 mm (1" × 1") | 850 kg (1,900 lb) |
SSH M | 30 kW (40 HP) | 350 mm (14") | 620 mm (24") | 24 + 18 | 50 × 50 mm (2" × 2") | 2,800 kg (6,200 lb) |
SSH L | 45 kW (60 HP) | 350 mm (14") | 920 mm (36") | 36 + 26 | 50 × 50 mm (2" × 2") | 4,750 kg (10,500 lb) |
SSH XL | 90 kW (125 HP) | 520 mm (20") | 1,200 mm (47") | 48 + 34 | 50 × 50 mm (2" × 2") | 5,550 kg (12,200 lb) |
Throughput depends on material type, size, density and screen selection. As a reference, SSH S/M/L/XL are the pre-shredders in MİZAR PRP S/M/L/XL cable lines, which are rated up to 400, 800, 1,300 and 2,000 kg/h.
What Materials Can the SSH Shred?
Cables: power, installation, automotive harness, telecom and mixed cable scrap
Radiators: copper/aluminum radiators, pre-shredded for separation
Printed circuit boards (PCBs): reduced before liberation
Plastic waste: lumps, profiles and rigid plastic parts
Single Shaft vs. Double Shaft Shredder: Which Do You Need?
Criteria | Single Shaft Shredder (SSH) | Double Shaft Shredder (DSH) |
Cutting principle | One rotor + hydraulic pusher | Two counter-rotating shafts |
Output size control | Yes, with a screen | Limited, set by blade width |
Output | Uniform, smaller pieces | Coarse strips and pieces |
Best for | Cable, plastics, preparing material for a granulator | Bulky, mixed, hard-to-feed material |
Typical position | Before a granulator | First stage, before a hammer mill or granulator |
Practical rule: Choose a single shaft shredder when you need a controlled output size for granulation, as in cable lines. Choose a double shaft shredder for bulky, mixed input such as e-waste and radiators in multi-metal lines.
Key Features of the SSH Series
Customized blades fitted to your material for the best cutting performance
Programmable hydraulic pusher for continuous, steady feeding without operator intervention
Variable-speed rotor that can be adjusted to suit the material
Automatic reverse that clears jams and keeps production running
Screen-controlled output for a uniform particle size ready for granulation
Components from world-class brands that meet MİZAR’s quality standards
CE certified (all models)
Frequently Asked Questions
What is a single shaft shredder used for?
It reduces bulky waste such as cables, radiators, PCBs and plastics into smaller, uniform pieces, usually before granulation or separation.
What does the hydraulic pusher do in a single shaft shredder?
It presses the material steadily against the rotor. Feeding stays consistent and the operator doesn’t have to intervene.
What happens if a single shaft shredder jams?
The MİZAR SSH rotor automatically reverses when it detects an overload or a jam, then resumes cutting. This prevents downtime.
How is the output size controlled?
By the screen under the rotor. Material stays in the cutting chamber until it’s small enough to pass through.
What is the difference between a single shaft and a double shaft shredder?
A single shaft shredder uses one rotor, a hydraulic pusher and a screen for controlled output size. A double shaft shredder uses two counter-rotating shafts for coarse shredding of bulky material.
Which SSH model do I need?
It depends on your hourly volume and material. SSH S fits compact lines up to about 400 kg/h, and SSH XL fits high-volume lines up to about 2,000 kg/h. Send us a sample for a material test.
Conclusion
The MİZAR SSH Series gives recyclers controlled, continuous shredding for cables, radiators, PCBs and plastic waste. With its programmable hydraulic pusher, variable-speed rotor, automatic reverse and screen-controlled output, it’s a reliable first stage for any recycling line, from compact plants to high-volume production.
Not sure which SSH model fits your material? Contact us with your material type and volume for a recommendation.
📞 Phone / WhatsApp: +90 537 520 35 34


