top of page

MİZAR FGR Series Fine Granulators for Cable Recycling

14 hours ago
4 min read
fine granulator for cable recycling

Short answer: The MİZAR FGR Series is a range of fine granulators that cut cable into small, uniform granules. Cutting frees the copper and aluminum conductors from the plastic insulation so the metal can be separated in the next stage. The series has four models, from 15 kW to 75 kW, with capacities of up to 400, 800, 1,300 and 2,000 kg/h. It can run as a standalone machine or as part of a complete MİZAR cable recycling line.

Key Takeaways

  • The FGR is a cutting granulator. It doesn’t grind, so it produces clean, uniform granules.

  • Fine granulator for cable recycling

  • It frees copper and aluminum from PVC, PE and rubber insulation.

  • Four models: FGR S, M, L and XL, from 15 to 75 kW.

  • Double-edged, re-sharpenable blades can be reused many times.

  • Interchangeable screens set the output granule size.

  • It works standalone or inside ERP and PRP cable recycling lines.

What Is a Fine Granulator?

A fine granulator is a size-reduction machine that cuts material between rotating blades (on the rotor) and fixed blades (in the housing). Material stays in the cutting chamber until it’s small enough to pass through a screen. The screen hole size sets the final particle size.

In cable recycling, the granulator is the stage where liberation happens. When cable is cut into small enough granules, the metal and the insulation become separate particles. A separator, such as a densimetric table or zigzag air classifier, can then split them into clean copper and plastic fractions.

Why cutting matters: A cutting granulator produces cleaner, more uniform granules than impact machines. That means sharper separation, higher copper purity and less fine-copper loss.

MİZAR FGR Series: Technical Specifications

Model

Motor Power

Rotor (Ø × Length)

Blades (Rotor + Stator)

Capacity*

Weight

FGR S

15 kW (20 HP)

350 × 400 mm (14" × 16")

7 + 2

up to 400 kg/h

1,800 kg (4,000 lb)

FGR M

30 kW (40 HP)

350 × 800 mm (14" × 32")

14 + 4

up to 800 kg/h

2,500 kg (5,500 lb)

FGR L

45 kW (60 HP)

350 × 1,200 mm (14" × 48")

21 + 6

up to 1,300 kg/h

3,100 kg (6,800 lb)

FGR XL

75 kW (100 HP)

350 × 1,600 mm (14" × 64")

28 + 8

up to 2,000 kg/h

5,000 kg (11,000 lb)

*Capacity depends on cable type, diameter, copper content, pre-shredding and screen size. Send us a sample for a material test.

How to choose a model: All four models share the same rotor diameter (350 mm). The rotor length increases from model to model, so capacity grows with it. Pick a model by your hourly input volume and leave some headroom for future growth.


Key Features of the FGR Series

Clean, uniform granulation

Cutting produces consistent granule sizes, which gives clean separation of copper and aluminum from plastic.

Double-edged, re-sharpenable blades

Each blade has two cutting edges and can be re-sharpened and reused many times. Blade life is long and operating costs stay low.

Interchangeable screens

Screen options (for example 3, 4 and 5 mm) let you match the granule size to your cable type: finer for thin or flexible cables, coarser for thick cables.

Energy-efficient drive

An efficient drive system and a rotor designed for cutting give stable performance with low energy use per ton.

Robust frame for continuous operation

A heavy-duty frame keeps the machine stable and reduces vibration in long production shifts.

Safety built in

An emergency stop system and integrated safety features protect operators.

Standalone or line-integrated

The FGR works as a standalone granulator or as the core of MİZAR’s complete cable recycling lines.

Where Does the FGR Fit in a Cable Recycling Line?

The FGR is the granulation stage in MİZAR’s cable recycling systems:

  • ERP Series (Eco): FGR + densimetric separator. A simple, cost-effective cable granulation line.

  • PRP Series (Pro): single-shaft shredder → FGR → zigzag separator → turbo mill → densimetric separator, with PLC control. Built for mixed and fine cables.

Typical cable types processed: power and installation cables, automotive wiring harnesses, telecom and data cables, household and appliance cables, and mixed copper/aluminum scrap cable.

Frequently Asked Questions

What is the capacity of a cable granulator?

The MİZAR FGR Series covers capacities of up to 400, 800, 1,300 and 2,000 kg/h, depending on the model. Actual capacity depends on cable type, diameter and screen size.

What is the difference between a granulator and a hammer mill?

A granulator cuts material with knives, while a hammer mill breaks it by impact. For cable recycling, cutting gives cleaner liberation and a more uniform granule size.

Can FGR granulator blades be re-sharpened?

Yes. FGR blades are double-edged and can be re-sharpened and reused many times, which keeps operating costs low.

Can the FGR process aluminum cables?

Yes. The FGR frees both copper and aluminum conductors from their insulation. Sort copper and aluminum cables before processing for the highest purity.

Do I need a shredder before the FGR?

For thick, long or mixed cable, a pre-shredder improves capacity and protects the blades. Thin, short cable can be fed directly. MİZAR PRP lines include a single-shaft shredder before the FGR.

Can the FGR be used as a standalone machine?

Yes. The FGR can work as a standalone granulator or as part of a complete MİZAR recycling line.

Why Choose MİZAR?

  • On-site survey and site-specific engineering

  • Material testing with your own cable samples

  • Turnkey recycling lines, from granulation to separation

  • Installation, commissioning and operator training

  • Fast after-sales service and competitive spare parts

  • Proven in 40+ countries

  • CE certified; ISO 9001, ISO 14001 and ISO 45001 certified manufacturer

Conclusion

The MİZAR FGR Series gives cable recyclers precise, cutting-based granulation in four sizes, from compact 400 kg/h operations to 2,000 kg/h production lines. Re-sharpenable blades, interchangeable screens and a robust, energy-efficient design make it a reliable core for any cable recycling plant.

Need help choosing the right FGR model? Send us your cable type and volume, and we’ll recommend the right configuration.

📞 +90 537 520 35 34

 
 
bottom of page