top of page

Greasy Cable Recycling: How to Recover Copper from Gel-Filled and Oily Cables

13 hours ago
4 min read
greasy cable recycling

Short answer: Greasy cables contain petroleum jelly, gel or grease inside the cable or on its sheath. That grease makes them hard to recycle: it sticks to blades and screens, makes particles clump together, and lets fine copper cling to the plastic, which lowers copper purity. They can still be recycled profitably with the right line. That means a shredder and granulator that keep cutting cleanly, effective dust and fines extraction, and a densimetric separator set up for the material. A sample test before investing shows the yield and purity you can expect.

Key Takeaways

  • “Greasy cable” usually means gel-filled (jelly-filled) telecom cable, plus oily or greased industrial and armored cables.

  • Grease causes clogging, clumping, poor separation and lower copper purity.

  • Many recyclers avoid greasy cable, so it can often be bought at a lower price.

  • A shredder → magnet → granulator → densimetric separator → dust collector line can process it.

  • Results depend on how much grease the cable contains. Always test with a sample first.

What Are Greasy Cables?

Greasy cables have grease, petroleum jelly or a water-blocking gel inside the cable, between the conductors, or on the outer sheath. The grease protects the cable from water, moisture and harsh conditions.

Common types of greasy cable scrap:

  • Gel-filled (jelly-filled) telecom cables: underground and outdoor telephone cables filled with petroleum jelly to block water. These are the most common type in scrap yards.

  • Water-blocked power cables: underground and buried power cables with filling compounds

  • Armored and industrial cables: cables with greased steel armor or oily sheaths, used in mining, marine systems, construction machinery and heavy industry

Why Are Greasy Cables Hard to Recycle?

  1. Clogging: Grease sticks to blades, screens and conveyors, which lowers capacity and means more cleaning stops.

  2. Clumping: Particles stick together instead of flowing freely, so they don’t separate cleanly.

  3. Copper loss to plastic: Fine copper particles stick to greasy plastic and end up in the plastic fraction.

  4. Lower purity: Plastic stuck to copper granules lowers the purity of the copper fraction.

  5. Contamination: Greasy dust and residue build up on the machines and in the work area.

Because of these problems, many recycling facilities refuse greasy cable or pay very little for it. For a recycler with the right equipment, that is an opportunity: cheaper input material with a real copper value.

How to Recycle Greasy Cable: The Process

A cable recycling line that can handle greasy cable typically includes:

1. Single shaft shredder (pre-shredding)Cuts long and tangled greasy cable into uniform pieces. Its hydraulic pusher keeps feeding the material steadily even when it’s sticky, and the rotor automatically reverses if a jam occurs.

2. Magnetic separator

Removes steel parts, such as armor and steel wires, from the shredded material. This protects the granulator and improves separation.

3. Fine granulator

Cuts the material into small granules and frees the copper from the insulation. Sharp, re-sharpenable blades and the right screen size are essential here, because dull blades smear greasy material instead of cutting it.

4. Densimetric separator

Separates copper and plastic by density on a vibrating, air-fluidized table. Adjusting airflow and table settings for the greasy material is key to purity.

5. Dust collector

Extracts dust and fine particles from the process. This keeps the separation clean and the work area safer.

Optional for difficult cable mixes:

  • Zigzag air separator: pre-separates light plastic, thick copper and fine copper

  • Turbo mill: re-processes the plastic fraction to recover more fine copper

What Results Can You Expect?

With a well-configured line, greasy cable can be turned into:

  • High-purity copper granules (purity depends on grease content and cable type)

  • A plastic fraction that can be sold or processed further

  • Steel recovered by the magnet

Why a sample test matters: Grease content varies a lot, from lightly filled telecom cable to heavily greased industrial cable. A material test with your own cable shows the real copper yield, purity and capacity before you invest. MİZAR offers material testing with customer samples.

MİZAR Solutions for Greasy Cable Recycling

MİZAR Recycling Machinery designs cable recycling lines in Konya, Türkiye, configured for the cable each customer actually processes:

  • ERP Series (Eco): FGR fine granulator + densimetric separator with dust collection. A cost-effective line that can be extended with a single shaft shredder and a magnetic separator for greasy cable.

  • PRP Series (Pro): single shaft shredder → magnet → FGR → zigzag separator → turbo mill → densimetric separator, with PLC control. The full configuration for difficult and mixed cable streams.

All lines are available in capacities of up to 400, 800, 1,300 and 2,000 kg/h, CE certified, and built with component brands chosen to fit your budget.

Frequently Asked Questions

What is a greasy cable?

A greasy cable has grease, petroleum jelly or a water-blocking gel inside or on the cable. The most common type in scrap is gel-filled telecom cable.

Can greasy cables be granulated?

Yes. With sharp cutting blades, the right screen size, dust extraction and a properly adjusted separator, greasy cable can be granulated and separated into copper and plastic.

Why do recyclers avoid greasy cable?

Grease clogs machines, makes particles clump together and lowers copper purity. Without the right equipment, processing is slow and the output quality is poor.

What copper purity can I get from greasy cable?

It depends on the grease content and the cable type. A sample test is the most reliable way to find out the purity and yield for your material.

Do I need a special machine for greasy cable?

You need a line configured for it: a shredder, magnet, granulator, densimetric separator and dust collector. For heavily greased or mixed cable, a zigzag separator and turbo mill improve copper recovery.

Conclusion

Greasy and gel-filled cables are among the most difficult materials in cable recycling, which is exactly why they can be profitable. With the right shredding, granulation, separation and dust extraction, recyclers can turn cable that others refuse into high-value copper.

Have greasy cable to process? Send us a sample, and we’ll test it and recommend the right line configuration.

MİZAR Recycling Machinery

📞 +90 537 520 35 34

 
 
bottom of page