Catalytic Converter Recycling: How Precious Metals Are Recovered

Short answer: Recycling a catalytic converter starts with decanning: the steel shell is opened and the ceramic core (monolith) is taken out. The core is then milled into a fine, uniform powder, sampled and assayed to measure its precious metal content, and sold to a refinery. The refinery extracts the platinum (Pt), palladium (Pd) and rhodium (Rh). The recycler’s job is to deliver clean, uniform powder with no losses, because the price is set by the assay of that powder.
Key Takeaways
Catalytic converters contain platinum group metals (PGMs): platinum, palladium and rhodium.
PGM content varies a lot by vehicle, from about 1–2 g in a small car to 12–15 g in a large truck.
The recycling chain is decanning → milling → homogenizing and sampling → refining.
Payment is based on the assay, so uniform powder and low dust loss directly protect revenue.
Hammer mills are the standard machine for turning ceramic cores into fine powder.
What Is a Catalytic Converter?
A catalytic converter is an exhaust device that turns harmful gases from a combustion engine (CO, hydrocarbons and NOx) into less harmful ones (CO₂, water and nitrogen).
How it’s built:
Steel shell (can): the outer housing
Substrate: usually a ceramic honeycomb made of cordierite; some models use a metallic foil substrate
Washcoat: a coating on the substrate that holds the precious metals, Pt, Pd and Rh
Nearly all of the value is in the washcoat on the substrate, not in the steel shell.
Why Are Catalytic Converters Valuable to Recycle?
Platinum, palladium and rhodium are among the rarest and most expensive metals in the world. The amount in each converter depends on the vehicle type, engine size, emission standard and model year. Most recycled catalytic converters in the U.S. contain recoverable amounts of PGMs ranging from 1-2 grams for a small car to 12-15 grams for a big truck.
The metal mix also varies. Gasoline converters usually contain more palladium and rhodium, while diesel converters are mostly platinum.
Because PGM prices move sharply, check current market prices before estimating the value of a batch. The only reliable way to value your material is an assay of a properly homogenized sample.
How Are Catalytic Converters Recycled? Step by Step
Collection and sorting: Converters are collected from end-of-life vehicles and sorted by type: ceramic or metallic, and gasoline or diesel.
Decanning: The steel shell is cut open and the ceramic core is taken out. The steel goes to scrap metal recycling.
Milling: A hammer mill grinds the ceramic core into fine powder. Grinding releases the PGM-bearing washcoat and makes the material uniform.
Homogenizing and sampling: The powder is mixed and representative samples are taken.
Assay: XRF or laboratory analysis measures the Pt, Pd and Rh content. This result sets the price.
Refining: Specialized refineries recover the precious metals chemically or pyrometallurgically.
Why Milling Quality Determines Your Revenue
The milling stage has a direct financial impact:
Uniform powder means an accurate assay. If the powder isn’t uniform, samples don’t represent the whole batch, which can lead to disputes with the buyer or underpayment.
Dust loss means value loss. The fine dust from ceramic cores carries precious metals. A closed system with effective dust collection keeps that value in your batch.
Hammer wear means downtime. Ceramic cores are highly abrasive, so wear-resistant hammers are essential.
MİZAR Equipment for Catalytic Converter Recycling
MİZAR Recycling Machinery manufactures the size-reduction equipment for the mechanical stage of catalytic converter recycling:
MİZAR Alligator Shear (ALS): cuts converters free from exhaust pipes and opens the steel shells during decanning. The blades can be re-sharpened and reused.
MİZAR Double Shaft Shredder (DSH): breaks up converter bodies and shells in higher-volume operations.
MİZAR Hammer Mill: grinds ceramic cores into fine, uniform powder ready for sampling. Its Hardox® 500 hammers resist wear from abrasive ceramic material.
All equipment is designed and manufactured in Konya, Türkiye, and can be configured with dust collection and component brands to suit your budget.
Environmental Benefits of Catalytic Converter Recycling
Less mining: Recycled PGMs reduce the need for new extraction, which is energy-intensive and concentrated in a few regions of the world.
Circular economy: Precious metals can be recycled many times without losing quality.
Hazardous waste prevention: Spent converters are kept out of landfill and dumping sites.
Steel recovery: Shells and housings go back into the steel recycling stream.
Frequently Asked Questions
How much platinum, palladium and rhodium is in a catalytic converter?It varies widely, from about 1–2 g of total PGMs in a small car to 12–15 g in a large truck. The exact content can only be found by assay.
What is decanning?Decanning is cutting open the steel shell of a catalytic converter to take out the ceramic core that holds the precious metals.
Why is a hammer mill used for catalytic converters?A hammer mill grinds the brittle ceramic core into fine, uniform powder by impact. This is needed for accurate sampling and efficient refining.
Can recyclers extract platinum and palladium themselves?Precious metal extraction is done by specialized refineries. A recycler’s job is to deliver clean, homogenized powder with an accurate assay.
Are ceramic and metallic catalytic converters processed the same way?No. Ceramic cores are milled into powder. Metallic foil substrates need a different treatment, so the two types should be sorted before processing.
Conclusion
Catalytic converters are among the most valuable materials in the recycling industry, but the value only reaches the recycler when the mechanical stage is done right. Clean decanning, uniform milling and low dust loss lead to accurate assays and fair payment. MİZAR’s alligator shears, shredders and Hardox® 500 hammer mills support each step of that process.
Planning a catalytic converter recycling operation? Contact MİZAR for an equipment configuration based on your volume.
📞 +90 537 520 35 34
Let’s build sustainable value together.


