Hammer Mill for Recycling: How It Works and When to Use One

Short answer: A Hammer Mill is a size-reduction machine. A rotor fitted with hammers spins at high speed and breaks material apart by impact, then pushes it through a screen that sets the final particle size. In recycling, hammer mills are used to break up composite materials such as e-waste, PCBs and mixed metal scrap. This frees the metals from the plastics and other materials around them so they can be separated in the next stage.
Key Takeaways
A hammer mill reduces material by impact. A granulator works differently: it cuts.
The screen (grate) under the rotor controls the output particle size.
It works best on brittle, hard or composite materials like PCBs, e-waste and mixed scrap.
For soft materials such as cables, a cutting granulator is usually the better choice.
Hammer wear is the main operating cost, so the hammer material directly affects profitability.
What Is a Hammer Mill?
A hammer mill is an industrial machine that reduces material to smaller particles. Inside a robust housing, a rotor carrying a set of hammers turns at high speed. Material is fed into the crushing chamber, where the hammers strike it again and again and throw it against the chamber walls. Once the particles are small enough, they pass through a screen at the bottom of the chamber. Changing the screen hole size changes the output size.
How Does a Hammer Mill Work?
Feeding: Material enters the crushing chamber, usually after pre-shredding.
Impact: The fast-turning hammers strike the material and break it apart.
Liberation: The impact breaks the bonds between different materials, for example metal and plastic in a circuit board.
Sizing: Particles that fit through the screen leave the mill. Larger ones stay inside and keep being crushed.
Separation (next stage): The output goes to magnetic, eddy current, air or density separators, which recover the individual materials.
Important: A hammer mill doesn’t separate materials by itself. It prepares them for separation. How clean your final metal fractions are depends on how well the mill liberates the material and on the separators that follow it.
What Materials Can a Hammer Mill Process in Recycling?
Printed circuit boards (PCBs): breaks the boards up and frees copper and precious metals from the fiberglass and resin
E-waste and small electronics: breaks down housings, components and mixed parts
Mixed metal scrap: reduces and cleans composite metal parts
Electric motors and similar scrap: after pre-shredding, helps free copper from steel and other materials
Outside recycling, hammer mills are also used in agriculture (feed and grain), mining (ores and minerals) and biomass processing. Each of those industries uses machine designs built for its own materials.
Hammer Mill vs. Granulator vs. Shredder
Criteria | Shredder | Hammer Mill | Granulator |
Working principle | Shearing/tearing (low speed) | Impact (high speed) | Cutting (blades) |
Typical position in line | First stage | Second stage | Second stage |
Best for | Bulky, mixed input | Brittle, hard, composite materials | Soft, ductile materials (cables, plastics) |
Key strength | Handles large, mixed input | Liberates bonded materials | Clean cut, precise particle size |
Main wear part | Blades | Hammers | Blades |
Practical rule: Use a granulator for cable recycling and a hammer mill for PCB and e-waste liberation. Many lines combine a shredder with one of the two, depending on the material.
Why Hammer Material Matters: Hardox® 500
In a hammer mill, the hammers do all the work. They’re also the part that wears out fastest. Every hammer change means downtime, labor and spare part costs.
MİZAR Hammer Mill hammers are made of Hardox® 500 wear-resistant steel, which offers:
High wear resistance, so the hammers hold their shape longer against abrasive materials like PCBs and metal scrap
Toughness, so they resist cracking under constant heavy impact
Longer service intervals, which means fewer stops and lower maintenance costs per ton processed
Why choose the MİZAR Hammer Mill:
Hardox® 500 hammers for long service life
Screen-based control of particle size
Easy integration with MİZAR shredders and separation equipment
Engineered and manufactured in Konya, Türkiye, with component brands chosen to fit your budget
Frequently Asked Questions
What is the difference between a hammer mill and a granulator?
A hammer mill reduces material by impact, while a granulator cuts it with blades. Hammer mills suit brittle and composite materials such as PCBs. Granulators suit soft materials such as cables and plastics.
Can a hammer mill be used for cable recycling?
It can process some cable scrap, but a cutting granulator is generally better for cables. It gives cleaner copper liberation and a more consistent particle size.
How is the particle size controlled in a hammer mill?
By the screen at the bottom of the crushing chamber. Smaller screen holes give finer output.
Why use Hardox® 500 for hammers?
Hardox® 500 is a wear-resistant steel that keeps its hardness and toughness under heavy impact. Hammers last longer and maintenance costs drop.
Does a hammer mill separate metals from plastic?
No. A hammer mill liberates the materials. The actual separation is done by magnetic, eddy current, air or density separators further down the line.
Conclusion
A hammer mill is one of the most effective tools for breaking apart composite recycling materials like PCBs and e-waste, as long as it’s used for the right material. With Hardox® 500 hammers and a design built for recycling, the MİZAR Hammer Mill delivers dependable size reduction with low maintenance costs.
Need help choosing between a hammer mill, a granulator or a combined line? Contact MİZAR for a configuration based on your material.
📞 +90 537 520 3534


